Headphones

Sony headphones are known for their durability, noise-canceling features, and long battery life. But, sometimes the headphones won’t charge. So, how to fix it? To fix Sony headphones that won’t charge, use a USB data blocker, use the correct charger, replace the charger, clean the charging port, or pair the headphones and then charge. Sony […]

Sony headphones, such as WH1000XM5, WH1000XM4, or WH1000XM3, are known for high-quality sound output, noise-canceling technology, and durability. But, sometimes the headphones won’t turn on. So, how to fix it? To fix Sony headphones that won’t turn on, press the power and AC buttons for 2 minutes, do a soft or hard reset, charge the

Noise-reduction headphones are passive sound blockers that use physical sound barriers and sound insulation materials around the ear cups to block out ambient sounds. Noise-cancelation headphones are active sound blockers that use electronic components that are integrated into the frame of the device to produce opposing sound waves that block out incoming sound waves from

Headphones, Earbuds, and AirPods are Bluetooth audio devices that are used to listen to music or for phone calls. Sometimes, these devices get dirty and you must clean them. So, how to clean them? To clean headphones, earbuds, or AirPods, use a soft dry lint-free cloth damped hand sanitizer or rubbing alcohol and clean the

The IPX (Ingress Protection) rating system refers to the level of protection provided by electric devices (including headphones), against dust and water. The IP and IPX ratings are defined by the International Electrotechnical Commission (IEC) under IEC 60529. They are tested by third-party IPX-licensed laboratories or by the manufacturers (but, they can’t use the IPX

Sony headphones are known for their high-quality sound output, noise-canceling technology (especially the WH-1000XM series), adaptive sound control, spatial audio, and reliable wireless connections. But, sometimes the headphones won’t connect (pair) with a device. So, how to fix it? To fix Sony headphones that won’t connect, enter pairing mode, unpair from other devices, perform a

Bluetooth interference refers to the distribution of the connection between the headphones and the audio source device (e.g. smartphones, TVs, Laptops, etc.).  Your Bluetooth headphones will keep disconnecting, stuttering, or making static sounds until you fix the problem. The common signs of Bluetooth interference are static (or white) noises, disconnection, and sound delays (or skips). The

JBL headphones are known for their sound quality, durability, waterproof qualities, and noise cancellation features. But, sometimes their headphones keep turning off. So, how to fix it? To fix JBL headphones that keep turning off, charge the battery, change the charger and port, disable the Auto-off feature, or reset them. An outdated firmware, faulty battery,

Sennheiser headphones are popular amongst gamers, but not limited to. They are durable and offer high sound quality, but sometimes they won’t charge. How to fix it? To fix Sennheiser headphones that won’t charge, use a different charger, perform a hard reset, clean the charging cradle (if using one), or replace the power supply or

Beats headphones lead the market because of their quality, durability, and unique features. But, sometimes their headphones won’t turn off. Why does this happen and how to fix it? To fix Beats headphones that won’t turn off, reset them to remove any software bugs. You should also connect the charger and press the power button

Beats headphones are known for their sound quality, design, and popularity. However, sometimes they won’t turn on, how to fix it? To fix Beats headphones that won’t turn on, hard reset them, re-charge them (with a proper charger), force-start, replace the faulty battery, replace the faulty internal hardware part, or contact the support. Quick Troubleshooting

Headphones working only on one side refer to when the audio is distributed in one channel (L/R) only. Why does this happen and how to fix it? Headphones will play audio from one channel only if the mono audio is enabled, the sound balance is more in one side, there’s a software bug or glitch,

Headphones pairing with a device and not playing music is a common issue. Why does this happen and how to fix it? This happens if the headphones’ battery is low, the Absolute volume is disabled, because of Bluetooth interference, or because of an outdated firmware version or Bluetooth driver. To fix headphones connected but no sound,

When you pair headphones to a source device (e.g. PC, smartphone, TV) the sound must come through the headphones and not the speaker. If the sound comes through the speakers after you pair the headphones, then there’s an issue with the Audio Jack Connector, Bluetooth connection, or audio driver. To fix the issue of headphones